Welcome to AMK METALLURGICAL MACHINERY GROUP CO.,LTD. corporate website Home | AddFavorite | Contact
 
PRODUCT

  Continuous Casting (CCM)

     Copper Mould Tube
     Copper Mould Plate
     Mould Assembly and Spare Parts
     Cooling Water Jacket
     Cooling Spray Nozzle
     CCM Spare Parts
     Torch Cutting Machine
     Electromagnetic stirrer (E.M.S.)
     Continuous Casting Machine

  Furnaces for Steel Making

     Electric Arc Furnace (EAF)
     Ladle Refining Furnace (LF)
     Industrial Furnace Spare Parts(9)
     Auxiliary Equipment (2)

  Graphite&Carbon Products

     Graphite electrode
     Graphite Crucible
     Other Graphite Products (9)
     Gouging Carbon Rod
     Carbon Additives

  Metallurgical consumables

     Oxygen Lance Pipe
     Thermal Cutting Lance
     Cored Wire
     Molten Steel Sampler
     Expendable Thermocouple
     Ceramic foam filter
     Slag pot
     Ingot mould

  Rolling Mill Related

     Cast iron & Cast steel rolls
     Forged steel rolls
     Tungsten carbide roll rilng
     Universal Shaft Coupling
     Gear shaft
     Rolling Mill Guide
     Rolling Bearing
     Bearing Housing
     Mandrel bars
     Water Quenching System
     Shear Blade

  Other Products

     Stainless Steel Products
     Flanges and pipe fittings
     Tube Sheet
     DISC Spring
     Electric Motor
     Grinding Steel Ball
     Electroslag Remelting Mould
     CNC cutting machine
CONTACT

Add:NO.39-310 OF YONG KANG 

HARDWARE CENTER,JIANGYIN 

214400,JIANGSU CHINA

E-mail:sales@amkgroup.cn
Tel :+86-510-86028707
Fax:+86-510-86028707
Site:www.amkmmgroup.com
 
PRODUCT
Location >> Home >> Product
 
Copper Mould Tube

 Material of CCM Copper Mould Tube

 The materials of copper mould tubes should be the ones with good  tensile strength, fatigue strength, proper hardness, low elongation and high heat conductivity coefficient. As a result, material like phosphorous deoxidize copper DHP,CUAGCR-ZR-CU are widely accepted by users.

Coatings:

Copper has lower hardness which leads to lower anti-abrasive property. Therefore, the area at the lower part of the moulds, where the stress increases drastically due to shells, will be more severely worn. To increase the life time of copper moulds, Uniform mould interior surface plating with suitable hardness is needed. Most of the copper mould tubes for small size billet casting are not used in any casting system where there are rigid casting stream support, therefore they are very sensitiveto be worn. We use hard chrome plating to increase the life of mould tubes. The plating thickness will be controlled in the best range. As for the coating of copper mould plates,based on our years of experience, we are able to provide Cr coating, Ni-Cr coating, Ni-Fe coating to meet the demand of various customers both at home and abroad.

    

 

Notice:

1. Please use the copper mould tubes within one year.

2. Please store the copper mould tubes in someplace dry and well ventilated.

3. Keep the copper mould tubes away from acidic materials, especially the internal coating surface.

4. Polish the external surface of the copper mould tubes with sand paper if oxidized.

5. Pouring the molten steel to the center of the copper mould tubes

6. Avoid internal surface scratch of the moulds caused by manual operation.


Next Page:Copper Mould Plate
    
 

Copyright © 2016 AMK METALLURGICAL MACHINERY GROUP CO.,LTD.

E-mail:sales@amkgroup.cn Tel:+86-510-86028707 Fax:+86-510-86028707

Add:NO.39-310 OF YONG KANG HARDWARE CENTER,JIANGYIN 214400,JIANGSU,CHINA   苏ICP备16027800号

 苏公网安备 32028102000374号